WATER PUMP IoT-CONTROLLER

$130.00

The Radio-Controller controls the Water Pump turn on/off.
The Radio-Controller receives data from Flow Sensor and sends information to the LoRa-Router and further to the IoT-Server (Internet-Of-Things Server). The IoT-Server analyzes this data and information on the current water consumption is displayed in the MY FARM menu.

Category:

Description



Information about the total water consumption for the previous watering cycle is displayed in the MY FARM menu too.
The Radio-Controller is housed in a DIN-rail enclosure and is powered by 220V AC voltage. The Controller can control electromagnetic starter of two-phases and three-phases Pump.

Communication between the RADIO-CONTROLLER and the LoRa-ROUTER is via radio.

Water Pump Control Modes:

  • Turning Pump on and off on command.
  • The period and duration of watering are set by the irrigation program that the User has created on his page. The Radio-Controller receives information about the watering schedule and operates autonomously until a new schedule is received. That is, even if the connection with the IoT-Server is interrupted, there will be no failure in watering the plants.
  • Synchronization of Pump operation with irrigation valves. You have the ability to synchronize Pump on/off when opening/closing a valve or valves.

Additional information

Remote sensors solution

Mixture pH, Ec, Temperature, Level, Flow sensors; air temperature sensor; PAR sensor, Without any sensors